Description

Veto Pro Pac Tech OT-LC BLACKOUT

The TECH OT-LC BLACKOUT is an all black, large capacity wide open tote with our V-SWAP system of removable/swappable panels, and additional open space that can be reoriented to accommodate multiple tools and gear for a variety of tasks. An integral structural box features a repositionable insert box and magnetic lid functioning as both storage for small items or as a partition and includes 2 plastic partitions for further customization of the center box. The TECH OT-LC BLACKOUT comes with the 10 pocket panel and 15 pocket panel, as well as with the Bulk Storage panel. Additional panels, insert boxes and partitions are available and sold separately.

NOTE: THIS BAG COMES WITH THE 10 AND 15 POCKET PANELS, AS WELL AS THE BULK STORAGE PANEL.

PRODUCT SPECIFICATIONS:

• Height (H): 12 (30.5cm)
• Width (W): 16 (40.5cm)
• Depth (D): 12 (30.5cm)
• Handle Height (HH): 18″ (46cm)
• Weight (empty): 9lbs/4kg
• Internal Volume: 950in3/ 15.5L
• Max Payload: 40lbs/ 18kg

MAXIMIZED TOOL STORAGE CAPACITY:

• 43 Available Pockets
• V-SWAP Removable Tool Pocket Panel System
• Tactical all-black construction
• Optional Bulk Panel Storage Included
• 2 Movable Plastic Partitions and 1 Magnetic Lid and Insert Box
• Holds Up To 4 Removable Insert Boxes
• Exterior Utility Pocket
• Electrical Tape Strap
• Detachable Padded Shoulder Strap
• Waterproof Polypropylene Base for moisture and abrasion protection
• Blackout Colorway

OTHER FEATURES:

• Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will clog the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didnt dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Dont Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed proceed with caution!

Product Information Sheet